Southern Wholesale Flooring Co.

Ultraplan 1 Plus is an HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. It has high strength and is abrasionresistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Click here to download specs

Ultraplan M20 Plus is an HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling, self-drying material. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a light-traffic industrial or commercial wear topping or underlayment for floor coverings.

Click here to download specs

Epoxy Bonding Agent and Primer

Planibond EBA is a two-component, multipurpose epoxy bonding agent and primer. Planibond EBA is non-shrinking, 100%-solids and moisture-insensitive. (Note: This is not a moisture-reduction barrier coating.) It is used primarily as a bonding agent for MAPEI self-leveling materials, screeds and repair mortars.

Planibond EBA also is used as a bonding agent for adhesion of fresh concrete and mortars to cured concrete and epoxy-primed steel; a grout used to install anchors, bolts, dowels, rods, steel bars and faceplates; an epoxy repair mortar (for interior use only) with the addition of select aggregates; a structural crack filler in gravity feed and injection applications; corrosion protection and coating for steel reinforcing bars; and a structural adhesive for properly prepared concrete, masonry, steel and approved plywood surfaces. Planibond EBA meets ASTM C881 requirements.

Click here to download specs

Advanced-Technology Acrylic Latex Primer for Concrete

Primer L (formerly Ultraprime L) is a concentrated, solvent-free acrylic primer used prior to the installation of underlayments and topping materials. It is green for easy identification. It improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment or topping materials. This product is solvent-free.

Click here to download specs

Water-Based Epoxy Primer

Primer WE (formerly Ultraprime WE) is a two-component, polymer-modified, solvent-free water-based epoxy primer for enhanced adhesion to nonporous substrates prior to the application of MAPEI self-leveling materials. When mixed, Primer WE is purple for easy identification. It improves adhesion over smooth, nonabsorbent and difficult-to-bond-to substrates such as properly prepared ceramic tile, cement-based terrazzo, old cutback adhesive residue and approved plywood subfloors. This product is solvent-free.

Click here to download specs

Underlayment Primer for Preparing Plywood, Concrete and Tile

Mapeprime 1K is a silane-modified, solvent-free, water-based epoxy primer for enhanced adhesion to porous and nonporous substrates before the application of tile-setting materials, underlayments and toppings. Utilizing the latest technological advancements in silane coupling agents, the one-component Mapeprime 1K is easy to apply, fast-drying and high-performance on a wide variety of surfaces.

Click here to download specs

Easy-preparation, self-leveling underlayment

Novoplan Easy is a high-strength, self-leveling cement-based underlayment and repair mix for interior concrete and engineer-approved floors. It typically requires only a clean, soundly bonded substrate before application. Novoplan Easy provides low installation costs and fast turnaround on job sites.

Click here to download specs

Polymer-Modified, Cement-Based, Self-Leveling Underlayment

Novoplan 2 is a high-strength, self-leveling, cement-based underlayment and repair mix for interior concrete and engineer-approved floors. Novoplan 2 is suited for leveling, smoothing and repairing interior floors prior to installation of floor coverings. Ceramic tile and natural stone can be installed 24 hours after application. Floor coverings – such as carpet, vinyl sheet goods, vinyl tile, vinyl composition tile (VCT), homogenous PVC, rubber and engineered wood plank – can be installed 1 to 3 days after application, depending upon thickness of application.

Click here to download specs