 |
Southern Wholesale Flooring Co. |
Serving the Southeast since 1952 |
Waterproofing
| 31534000 - MAPEI Mapelastic™ 315
Mapelastic 315 is a trowel-applied, two-component, flexible, fiber-reinforced waterproofing and crack-isolation membrane. Mapelastic 315 meets ANSI A118.10 requirements for waterproofing and is IAPMO-listed as a shower-pan liner. |
| 35553000 - MAPEI Mapelastic™ HPG
Flexible Waterproofing and Crack-Isolation Membrane
|
| 04050000 - MAPEI Mapeguard™ SM
Mapeguard™ SM (formerly Mapelastic SM) is a flexible, thin, load-bearing, fabric reinforced, ’peel-and-stick’ crack-isolation and sound-reduction membrane over which ceramic tile or stone can be installed immediately with a latex-modified Portland-cement mortar. |
| PLANIEASY - MAPEI Planiseal™ Easy
Fresh Concrete Subfloor Sealer Planiseal Easy is a proprietary MAPEI acrylic polymer specifically designed to seal fresh or green concrete slabs that exhibit moisture vapor emission rates (MVERs) up to 8 lbs. per 1,000 sq. ft. per 24 hours. Tinted green, Planiseal Easy is easy to apply with a roller, squeegee or brush. This FastTrack Ready™ product dries quickly, allowing for installation of floor-covering within 24 hours. |
| 45657000 - MAPEI Planiseal™ MRB
Moisture-reduction barrier
|
| PLANIWFM - MAPEI Planiseal™ WFM
Premium one-part, urethane wood-flooring membrane Planiseal WFM is a one-component, ready-to-use moisture-curing urethane membrane designed to protect glue-down wood-flooring installations from subfloor moisture damage. Planiseal WFM’s special formula regulates dryness by controlling the release of moisture vapor transmissions up to 25lbs. per 1,000 sq. ft. per 24 hours, allowing wood flooring to accommodate nonstructural in-plane cracks up to 1/8" (3mm) without showing through on the flooring surface. In addition, Planiseal WFM provides superior sounds transmission reduction data when used in combination with any of MAPEI's urethane wood-flooring adhesives. This membrane provides Sound Transmission Class (STC) and Impact Isolation Class (IIC) ratings of 69 and 71 respectively in wood-flooring installations. Use in conjunction with Ultrabond 1000, Ultrabond 990, Ultrabond 980, and Ultrabond 975 urethane wood-flooring adhesives. |
Click here for pricing, or call us at 770-514-7110 |
Flexible Cement-Based Waterproofing Membrane
Mapelastic HPG is a next-generation, ready-to-use liquid membrane suited for concrete, masonry, cement board and engineer-approved, exterior-grade plywood. It is designed for both commercial and residential use. It can be applied to interior horizontal and vertical surfaces using a trowel or roller, and is a highly flexible acrylic-based membrane. Mapelastic HPG has excellent compatibility with cement-based bonding materials. It can accommodate minor in-plane substrate movement and also can be used as a crack-isolation membrane (when used with MAPEI’s Fiberglass Mesh). When used with this mesh, Mapelastic HPG is IAPMO-approved and meets ANSI A118.10 standards for use as a shower-pan liner.
This product includes BioBlock™ technology.
Planiseal MRB is a two-component, solvent-free epoxy coating specially formulated to reduce concrete’s moisture vapor transmission rates of up to 15 lbs. per 1,000 sq. ft. (6.80 kg per 92.9 m2) per 24 hours to a rate of below 3 lbs. per 1,000 sq. ft. (1.36 kg per 92.9 m2) per 24 hours. Planiseal MRB provides a uniform protective barrier for the installation of floor coverings, tile, stone and concrete toppings.